Description
Plans are not included with Kit but are available from us HERE
Accessories are available through the following vendors and not supplied by LCKA.
Jerry Bates:
-Cowl and Firewall Ring (8 3/4” dia.) #4502
-Wheel Pants #4503
-Belly Pan #4504
-Headrest #4505
-Tail Cone #4506
This plan is one of the finest, most beautifully prepared set of drawings, I have ever seen. Robert Sweitzer has detailed everything including, landing gear, scale-like control systems, servo and radio installation, 1/4 scale cockpit and interior details, flying wire and strut fittings, and even the scale propeller. Numerous isometric details are included to help with construction. The fuselage can be framed from 1/4” and
3/16” hardwood dowels for scale realism or you can use square spruce or basswood. Wings are plug-in type with cabane and upper center section remaining in place on the fuselage. Color and marking details are shown for several versions including “Canadian Airways Limited – Royal Mail” and Standard Oil of California”. Plans consist of six sheets, one 3’x6’, two 3’x8’, one 3’x8’, one 3’x9’-6”, and one 3’x11’.
*Please note our Laser Part Kits only include the parts that are laid out on the original plans, made from balsa and plywood. Wing ribs and fuselage formers are typical parts included with these kits but the amount can vary depending on the quality of the plans. If you would like to know what you are expected to receive, we recommend ordering the plans before making a decision on your kit. The majority of our kits don’t include the plans unless specifically stated. Laser Parts Kits will also require additional materials not supplied by LCKA. Some of these items are sheeting, spars, stringers, hardwood blocks, cowls, canopies, electronics and engine. If there is something else you’re not too sure of, please contact us before purchase.
