Grumman F6F Hellcat {1/5.3} – Plans (NZ)


or 4 payments of AUD$24.48 with Afterpay








Wing Area

1700 sq


32-42 lbs


3.7-5.8 cu”
Add to Wishlist
Categories: ,


Accessories are available through the following vendors and not supplied by LCKA.

Nick Ziroli:
-F6F Hellcat Fiberglass Cowl
-F6F Hellcat Canopy (F6F-3 or F6F-5)
-F6F Hellcat Fiberglass Tail Cone and Belly Pan
-F6F Hellcat Fuselage Centerline Drop Tank
-Vacuum Formed Dummy Engines
-F6F Hellcat Gear Doors
-FTE-Cast Resin Dummy Engine
-Hamilton Standard Scale Static Propeller Kit (3 Blades)
-Canopy Rail Set for Warbirds
-Vinyl Graphics
-Pilot Figure
-Aluminum Wing Tube and Sleeve Set
-All Undercarriage requirements.

The giant scale F6F-3/5 Hellcat plan set is 1/5.3 scale and consists of four large sheets that clearly illustrate all structure as well as showing installation of flaps and retracts. The F6F-3/5 Hellcat plan shows the installation of Robart retracts, fixed wire gear, servos and Zenoah G-62 engine and features three piece wing. The basic structures use conventional “modeling” tools and materials such as balsa and plywood, and the techniques are straightforward; easily accomplished by anyone with previous model building experience. There are many online building threads at forums and forums for Nick’s plans. Tech support is also available via email at or by phone 9:00 to 5:00 Mon – Fri EST 631-467-4765. The plans have a separate instruction guide and building notes on the plans. There is quality landing gear made by other manufacturers such as Sierra Giant Scale or Century Jet. If you choose gear or an engine not shown on the plans you should have them on hand when you start construction to make any changes needed for mounting. Nick Ziroli Plans recommends covering the airframe with1oz fiberglass cloth and ZAP Z-poxy finishing resin and elevator and rudder with iron on cloth covering such as solartex.. Nick Ziroli designs are equally at home at the local sport flying field or the winner’s circle at prestigious scale events such as Top Gun and the Scale Master’s; you can add as much detail as you like. Nick Ziroli Plans has building and scale accessories available for the F6F-3/5 Hellcat. Over the years, Nick’s designs have gained the enviable reputation for being among the most “flyable” giant scale models available.

Additional information

Weight 1.5 kg
Dimensions 95 × 8 × 8 cm

You may also like…

Select Currency
AUDAustralian dollar
EUR Euro