Cessna C-37 Airmaster {1/4} – Laser Parts Kit (JB)449.5

AUD$449.50

or 4 payments of AUD$112.38 with Afterpay

 

Scale

1/4

Wingspan

102”

Length

74”

Wing Area

1638 sq

Weight

18 lbs

Engine

G26

Add Plans

Add to Wishlist

Description

Plans are not included with Kit but are available from us HERE

Accessories are available through the following vendors and not supplied by LCKA.

Jerry Bates:
-Engine Cowl #6302

The plans consist of 4 CAD drawings 36” x 80”. The model is conventional balsa/ ply construction. This design is a collaboration with Bob Bishop. We are proud to represent Bob efforts with another fabulous design.
Derived from the C-34, the 1937(C-37) Airmaster is a stylish and graceful four-place, high- wing cabin airplane. Ingenious and simple in design, it makes a great scale model for everyone from the novice plans builder to the serious competitor. The lack of wing struts is a particularly attractive advantage when you are setting up your model at the flying field. The wings are two-piece and attach to the fuselage by means of aluminum tube and sleeves in the wing.

*Please note our Laser Part Kits only include the parts that are laid out on the original plans, made from balsa and plywood. Wing ribs and fuselage formers are typical parts included with these kits but the amount can vary depending on the quality of the plans. If you would like to know what you are expected to receive, we recommend ordering the plans before making a decision on your kit. The majority of our kits don’t include the plans unless specifically stated. Laser Parts Kits will also require additional materials not supplied by LCKA. Some of these items are sheeting, spars, stringers, hardwood blocks, cowls, canopies, electronics and engine. If there is something else you’re not too sure of, please contact us before purchase.

Additional information

Weight 5 kg
Dimensions 93 × 31 × 10 cm

You may also like…

Select Currency
AUDAustralian dollar
EUR Euro