Aermacchi MB-326 Xavante {1/5} – Laser Parts Kit (CB)


or 4 payments of AUD$90.48 with Afterpay







Wing Area


8 lbs



Add to Wishlist


Plans are not included with Kit but are available from us HERE

Radio: 5~8 ch
Detailed in drawing
-Wing tip tanks
-Retractable landing gear.
-Tanks under the wings, may be released by radio.

No canopy available and has to be made by builder.

We recommend for the first tests, a limit of ailerons 6mm up and down.
In the elevator recommend 12mm up and 12mm down at most.
After the first test flights, you can gradually change the setting for optimum performance.
Excessive movement of the ailerons and elevator, causing the instability of this model.

*Please note our Laser Part Kits only include the parts that are laid out on the original plans, made from balsa and plywood. Wing ribs and fuselage formers are typical parts included with these kits but the amount can vary depending on the quality of the plans. If you would like to know what you are expected to receive, we recommend ordering the plans before making a decision on your kit. The majority of our kits don’t include the plans unless specifically stated. Laser Parts Kits will also require additional materials not supplied by LCKA. Some of these items are sheeting, spars, stringers, hardwood blocks, cowls, canopies, electronics and engine. If there is something else you’re not too sure of, please contact us before purchase.

Additional information

Weight 6 kg
Dimensions 93 × 31 × 10 cm
Select Currency
AUDAustralian dollar
EUR Euro